日本SMC位置傳感器，SMC傳感器參數
    SMC氣動位置傳感器ISA2作用和特性
    ＊確認位置用的非接觸式傳感器。
    SMC Pneumatic Position Sensor ISA2 Principle of Operation
    測間隙，用設定手輪S3使加在壓力傳感器上的壓力平衡（P1=P2）。
    ＊可與減壓閥、2通電磁閥組合，減少配管工作。.
    SMC Pneumatic Position Sensor ISA2 Function and Characteristics
    * Confirm the position of the non-contact sensor.
    * The structure of the gas bridge circuit and the semiconductor pressure sensor
    Action principle as shown below, by the air bridge circuit. Provide inspection on the detection nozzle (S4)
    * When loading, the number of increase and decrease is simple. Use socket connection to reduce wiring work.
    * Can be combined with pressure reducing valve, 2-way solenoid valve to reduce piping work. The
    日本SMC位置傳感器，SMC傳感器參數
    當檢出噴口（S4）開放時，由壓力傳感器可檢出產生的差壓。當工件
    靠近檢出噴口上，背壓P2上升。當P2≥P1時，開關輸出ON,在檢出間
    隙以下，外部便有輸出。.
    SMC氣動位置傳感器ISA2動作原理
    動作原理如下圖所示，由氣橋回路構成。在檢出噴口（S4）上提供檢
    is less susceptible to the influence of the supply pressure fluctuation.
    ＊通過氣橋回路和半導體式壓力傳感器的構成，不易受供給壓力變動的影響。
    ＊可穩定的檢出0.01~0.5mm的間隙。
    ＊帶LED水平計，zui適位置一目了然。
    And the pressure on the pressure sensor (P1 = P2) is adjusted by the setting handwheel S3.
    * Stable detection of 0.01 ~ 0.5mm gap.
    * With LED level meter, the best position at a glance.
    ＊集裝時，增減位數簡單。采用插座式連接，減少配線工作。
    ，SMC傳感器參數